RE: DIG-L: FW: GAS TREATMENT ENQUIRY

[Marty Climenhaga <mclimenhaga@macviro.com>]

Hello
There are others that know a lot more than me on this digestion list, but 
for iron oxide I think you can use steel wool, you can just put a wad of it 
in a removable part of your gas outlet pipe and change it every six months, 
or more often if it corrodes quickly.

-----Original Message-----
From:	Schomaker, Ton [SMTP:t.schomaker@royalhaskoning.com]
Sent:	Thursday, May 23, 2002 10:08 AM
To:	Crest DIG-L discussion list (E-mail)
Cc:	'saw.julian@thales-geosolutions.com'
Subject:	DIG-L: FW: GAS TREATMENT ENQUIRY

Herewith I forward some questions regarding biogas treatment comming from
Julian Saw in Birma.
If someone has practical answers for his small scale project please send
them to his mail address

saw.julian@thales-geosolutions.com

T. Schomaker

-----Original Message-----
From: saw.julian@thales-geosolutions.com
[mailto:saw.julian@thales-geosolutions.com]
Sent: dinsdag 21 mei 2002 4:04
To: t.schomaker@royalhaskoning.com
Subject: GAS TREATMENT ENQUIRY


Dear Sir
I'm an electrical engineer from Burma( Myanmar),currently working in
Singapore. I'm interested in anaerobic digestion to produce methane to use
for cooking, driving gas engine. I knew about methane gas, can be produced
from waste such as animal manure, vegetable waste since I was quite young.
Now I've been surfing many web sites for anaerobic digestion and I have
collected some quite good enough information but I believe I still need to
consult with some experts like you to know about more of anaerobic
digestion.
I have two cows but I can buy cattle manure from my neighbour those who not
interested in anaerobic digestion to
produce bio gas. I'm thinking to use bio gas to drive engine. For that
purpose I should do gas treatment to prevent from corrosion of engine parts
to remove H2S, CO2 and moisture. Information from a web site is to use iron
oxide pellets to scrub H2S as cheapest way. What is iron oxide? It is just
rusty iron?
To remove CO2 is using water. How is it. My idea is simple way. Just let 
the
gas flow through series of water tubes. Change CO2 saturated water (
carbonic acid) regularly. Is it possible? Effective?
To remove water(moisture) is just condensing method.
Can I have above 90% purified methane gas?
How is your suggestion?
I will be very thankful if you can provide me some useful information for
bio gas treatment with very simple and least expensive way to do it.
Best regards, Julian

Digestion List Archives:
http://www.crest.org/discussion/digestion/200202/

Digestion List Moderator:
Paul Harris, paul.harris@adelaide.edu.au
http://www.roseworthy.adelaide.edu.au/~pharris
List-Post: <mailto:digestion@crest.org>
List-Help: <mailto:digestion-help@crest.org>
List-Unsubscribe: <mailto:digestion-unsubscribe@crest.org>
List-Subscribe: <mailto:digestion-subscribe@crest.org>

Other Digestion Events and Information:
http://www.bioenergy2002.org
http://crest.org/discussiongroups/resources/biomass/biogas/BIOGASMK.pdf
http://www.crest.org/articles/static/1/1010424940_7.html

Beginners Tour of Biogas
http://WWW.roseworthy.adelaide.edu.au/~pharris/biogas/beginners


Digestion List Archives:
http://www.crest.org/discussion/digestion/200202/

Digestion List Moderator:
Paul Harris, paul.harris@adelaide.edu.au
http://www.roseworthy.adelaide.edu.au/~pharris
List-Post: <mailto:digestion@crest.org>
List-Help: <mailto:digestion-help@crest.org>
List-Unsubscribe: <mailto:digestion-unsubscribe@crest.org>
List-Subscribe: <mailto:digestion-subscribe@crest.org>

Other Digestion Events and Information:
http://www.bioenergy2002.org
http://crest.org/discussiongroups/resources/biomass/biogas/BIOGASMK.pdf
http://www.crest.org/articles/static/1/1010424940_7.html

Beginners Tour of Biogas
http://WWW.roseworthy.adelaide.edu.au/~pharris/biogas/beginners