Re: EMeter %remaining

[Paul G <neong@gte.net>]

>My EMeter is currently set to:
>         Ah capacity = 55
>         Peukert = 1.09
>         Discharge Floor = 80
>
>This doesn't seem to correspond with your guess...

Very true John. Still, its the only setting I can find in my e-meter manual
that would seem to lead to this. Perhaps it causes it to revert to a
non-corrected SOC? That would indicate that the change happens at 25ah
actual removed, and Optimas are pretty good at dishing out around 35ah (or
even more if your quite kind) at EV loads (not that repeating this often is
great for cycle life, but they dish out the power). F09, ah (but not kWh),
t (time or percent), and the bar graph display are based on the peukert's
corrected capacity.

Neon