Mailing-List: contact gasification-help@crest.org; run by ezmlm
Hello Biomass and Gasification Colleagues
I promised a couple of months ago to dig out our conversion tables for
biomass and engines we developed at Fluidyne for our own use.
Biomass is a fickle fuel and there are always variations to consider in
making calculations. If you just use these basic figures you won't go
wrong, unless that is you crib them to replace laboratory tests, so consider
them real world values!
The engine tables are not found in existing literature and have been tested
over thousands of hours using various engines. Use them sensibly and you
can do all sorts of cross calculations , that is with normally aspirated
engines. No references apply to turbo charged engines.
The tables will be available in a day or so, and we will also add them to
the Fluidyne Archive www.fluidynenz.250x.com
If you choose to include these tables in published literature, then extend
the courtesy of acknowledging their source.
Regards
Doug Williams
Fluidyne Gasification.
-
Gasification List Archives:
http://www.crest.org/discussion/gasification/current/
Gasification List Moderator:
Tom Reed, Biomass Energy Foundation, Reedtb2@cs.com
www.webpan.com/BEF
List-Post: <mailto:gasification@crest.org>
List-Help: <mailto:gasification-help@crest.org>
List-Unsubscribe: <mailto:gasification-unsubscribe@crest.org>
List-Subscribe: <mailto:gasification-subscribe@crest.org>
Sponsor the Gasification List: http://www.crest.org/discuss3.html
-
Other Gasification Events and Information:
http://www.fsec.ucf.edu/bioam/http://solstice.crest.org/renewables/biomass-info/gasref.shtmlhttp://solstice.crest.org/renewables/biomass-info/
