Re: GAS-L: Biomass Gasification and Feeding

["Thomas Koch" <Tk@tke.dk>]

Andrew, i first misunderstood your therminology concerning pressurised or not.

I think you should look at the gasifiers developed by Mukunda if your ambition is developng countries.

Send my a sketch of your gasifier, and I will suggest a feeding system.

Best regards

Thomas

----- Original Message ----- 
From: "andrew.heggie@dtn.ntl.com" <andrew.heggie@ntlworld.com>
To: "Thomas Koch" <Tk@tke.dk>; "gasification" <gasification@crest.org>
Sent: Wednesday, August 21, 2002 4:12 AM
Subject: Re: GAS-L: Biomass Gasification and Feeding


> 
> Thomas, thanks for a very informative reply on plug type stokers, you gave the general information I first asked for without giving away secrets. A bit like describing a 4cycle engine without ging into detailsn of bore, stroke, timing etc.
> 
> Now who would like to decribe the pertinent details of other stokers and theirn sealing methods?
> 
> AJH Boston Mass for a while
> 


-
Gasification List Archives:
http://www.crest.org/discussion/gasification/200202/

Gasification List Moderator:
Tom Reed, Biomass Energy Foundation,  Reedtb2@cs.com
www.webpan.com/BEF
List-Post: <mailto:gasification@crest.org>
List-Help: <mailto:gasification-help@crest.org>
List-Unsubscribe: <mailto:gasification-unsubscribe@crest.org>
List-Subscribe: <mailto:gasification-subscribe@crest.org>

Sponsor the Gasification List: http://www.crest.org/discuss3.html
-
Other Gasification Events and Information:
http://www.bioenergy2002.org
http://www.crest.org/articles/static/1/1010424940_7.html Bioenergy
http://www.crest.org/articles/static/1/1011975339_7.html Gasification
http://www.crest.org/articles/static/1/1011975672_7.html Carbon