On Mon, 19 Aug 2002 20:44:04 -0600, "Greg and April" <gregandapril@earthlink.net> wrote: >This chipper looks like it might be useful, you can change the size of the >chips. > >http://www.laimet.com/eng/chippers.html This looks like the conical screw chipper marketed by Sasmo in UK. You can only vary the chip length by changing the screw. I found it was difficult to keep sharp. It is one of the few chunkers still on the market when fitted with a large pitched screw. I know someone modified it to slow speed use and used a conveyor to remove the chunks. Many disc type chippers can vary the chip length below a maximum by shortening the distance the blade projects from the disc (and concurrently resetting the anvil). AJH Gasification List Moderator: Tom Reed, Biomass Energy Foundation, tombreed@attbi.com Biomass = Energy Foundation, www.woodgas.com List-Post: <mailto:gasification@crest.org> List-Help: <mailto:gasification-help@crest.org> List-Unsubscribe: <mailto:gasification-unsubscribe@crest.org> List-Subscribe: <mailto:gasification-subscribe@crest.org> - Gasification List Archives http://www.crest.org/discussion/gasification/200202/ Bioenergy 2002 http://www.bioenergy2002.org/ 200 kWe CHP Discussion http://crest.org/discussiongroups/resources/gasification/200kWCHP.html Gasification Reference http://www.crest.org/articles/static/1/1011975339_7.html >
