RE: GBlist: green building and energy efficiency

[Koffringa@ase.org]

Energy provisions are incorporated into building codes, but they do not
constitute national standards, because there is no national code. States
(and in some cases, localities) have to choose to adopt code individually.
 
Here are some codes-related links.
 
http://www.intlcode.org/ <http://www.intlcode.org/> 
 
http://www.bcap-energy.org/ <http://www.bcap-energy.org/> 
 
----Original Message-----
From: Ray Zorz [mailto:RZorz@ScottsdaleChamber.com]
Sent: Tuesday, January 30, 2001 3:40 PM
To: greenbuilding@crest.org
Subject: RE: GBlist: green building and energy efficiency



I thought that there were going to be some national standards incorporated
into the building codes (IBC's - international building codes) that were
initially going to focus on energy.  


-----Original Message----- 
From: Gormans [ mailto:sgorman@erols.com <mailto:sgorman@erols.com> ] 
Sent: Tuesday, January 30, 2001 4:27 PM 
To: 'Martha Arosemena'; greenbuilding@crest.org 
Subject: RE: GBlist: green building and energy efficiency 


The cheapest efficiency measure would be to require the same standards in 
house siting that were common practice in the United States in the 1800's: 
80% of all construction had the major part of the building facing due 
south.  This alone reduces at least 15%  of the heating and cooling costs, 
and it costs close to nothing. Add to that some decent insulation and 
infiltration standards, and your energy costs will be much lower. 

However, I know of no city or MSA that is smart enought to require this. 

Steve Gorman 
Virginia Solar Council 

-----Original Message----- 
From:   Martha Arosemena [SMTP:MarthaA@austin.rr.com] 
Sent:   Tuesday, January 30, 2001 6:47 AM 
To:     greenbuilding@crest.org 
Subject:        GBlist: green building and energy efficiency 

Hi!  I am a graduate student in the University of Texas' Community and 
Regional Planning program and am working on a professional report 
concerning 
the feasibility of incorporating green building codes and/or energy 
efficiency measures into the Houston CMSA State Implementation Plan (SIP). 

I have a couple of questions that I'm hoping that this group might be able 
to provide some general answers/leads for additional information: 

1. What do you feel are the top 5 or 10 easiest/most likely to be accepted 
green building/energy efficiency measures that a city or MSA could require? 

2. Do you know of any cities or areas that have done this?  Which ones? 

3. What do you feel are the biggest barriers to requiring this and what 
would be some ways to remove those barriers? 

I know these are rather broad questions - any comments and/or leads would 
be 
much appreciated! 

Thanks! 

Martha Arosemena 
marthaa@austin.rr.com 
______________________________________________________________________ 
This greenbuilding dialogue is sponsored by CREST <www.crest.org> 
BuildingGreen <www.buildinggreen.com> and Oikos <www.oikos.com> 
For  instructions send  e-mail to  greenbuilding-request@crest.org. 
______________________________________________________________________ 
______________________________________________________________________ 
This greenbuilding dialogue is sponsored by CREST <www.crest.org> 
BuildingGreen <www.buildinggreen.com> and Oikos <www.oikos.com> 
For  instructions send  e-mail to  greenbuilding-request@crest.org. 
______________________________________________________________________ 

______________________________________________________________________
This greenbuilding dialogue is sponsored by CREST <www.crest.org>
BuildingGreen <www.buildinggreen.com> and Oikos <www.oikos.com>
For  instructions send  e-mail to  greenbuilding-request@crest.org.
______________________________________________________________________