Greenbuilding Archive for July 2002

Nate,

AFM makes a product called X-158 which might work for your situation. Here is the description taken right from their literature:

SafeChoice X-158 is a premium quality, clear liquid coating for prophylactic use where mold and mildew are likely to appear. It is not a cleaning agent, but a clear defensive sealer designed to encapsulate surfaces which would typically be subject to mold and mildew attack. Because it is not toxic and low odor (odor free when dry), it is ideal for use in unventilated, confined areas such as shower stalls, bathrooms and saunas. Yet it is durable enough for use on roofs, air filtration systems and spa decks. It may also be used on countertops, walls, floors and ceilings. SafeChoice X-158 coating applies quickly and simply. One application lasts between 30 and 180 days, depending on the severity of the conditions.

USE ON: SafeChoice X-158 can be applied over any surface where mold and mildew might appear, including but not limited to tile, grout, epoxy coatings, rubber sealants, acrylic, wood, masonry and concrete including exterior walls and roofs. DRYING TIME: Within a few minutes. LIMITATIONS: Because SafeChoice X-158 is a prophylactic coating and does not kill mold and mildew organisms, any surface coated must first be made free of existing mold and mildew.

SURFACE PREPARATION: Existing mold and mildew must be removed. Infested areas should first be cleaned with SafeChoice Super Clean and a stiff bristle brush or broom prior to coating the surface with SafeChoice X-158. APPLICATION: Apply full strength with a sponge or preferably a hand sprayer. Let dry. Repeat every 30-180 days, depending on results. COVERAGE: Adjust to job - depends upon porosity of surface.

Re: [GBlist] Fungicide in Paint??