Re: SB: Thanks! and netting pins?

["John Swearingen" <john@skillful-means.com>]

We've also used 14g galvanized "hanger rods"--stiff wires used for
installing hung ceilings.  They come in several lengths, we buy them 5' long
and cut them in half for thru ties or cut them into little pieces for
staples.

John

----- Original Message -----
From: "Malcom Snakesfield" <snakesfield@hotmail.com>
To: <scherf@spacestar.net>; <strawbale@crest.org>
Sent: Monday, August 27, 2001 4:37 PM
Subject: Re: SB: Thanks! and netting pins?


>
> John, they are Grip-rite fasteners by Prime Source building products in
> Dallas TX. They are not round cap so that is probably where you are
getting
> lost. They are:
> po# 90-061130 size 12GA x 6"
> Type E,G, metal square cap roofing (this is what is on the box)
> They come in a 25 lbs box. I ordered them through John at San Lorenzo
Lumber
> (the one on 41st Ave. in Capitola CA.)
> They are galvanized, and the nail part is ribbed so it grabs the straw.
They
> have worked great for me. Good luck!
>
> >From: John Scherf <scherf@spacestar.net>
> >To: <strawbale@crest.org>
> >Subject: SB:   Thanks! and netting pins?
> >Date: Mon, 27 Aug 2001 15:43:57 -0500
> >
> >Thanks for everyone's patience and help. I am making some progress. Found
> >some nearly local stucco guys who have a sprayer!
> >
> >Meanwhile, ...
> >
> >
> >on 8/25/01 10:30 AM, Rob Tom at
> >strawbale-digest-help@crest.org wrote:
> >
> >  I would suggest
> > > having a look at the SB List archives first (where these topics have
> >been
> > > discussed a bazillion
> > > or maybe even a gazillion ?  times) and then afterwards, posing some
> >specific
> > > questions .
> >
> >
> >
> >Great suggestion... having done some of this, I am a bit overwhelmed...
is
> >there an archive site that has a search engine?  I've been using google
and
> >the results are interesting but not exactly stellar...
> >
> >
> >1 very specific question. I saw a post recommending a netting fastener
made
> >by Grip Rite that is 6" long with a designation  "EGA/T  " with a round
> >cap.
> >
> >
> >I've called two Prime source locations  (Texas and Wisconsin) because
they
> >were listed as the source in the post,   but noone can figure out what
I'm
> >talking about...
> >
> >Help!!   anybody know what / where these are?  -  they sounded perfect
for
> >my Application.
> >
> >Thanks
> >
> >John Scherf
> >
> >
> >-------------------------------------------------------------------------
> >To unsubscribe from the list, send a message to:
> >    <strawbale-unsubscribe@crest.org>
> >
> >or for the digest to:
> >    <strawbale-digest-unsubscribe@crest.org>
> >
> >Please send any list administration questions to
> >strawbale-owner@crest.org
> >
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
>
> -------------------------------------------------------------------------
> To unsubscribe from the list, send a message to:
>    <strawbale-unsubscribe@crest.org>
>
> or for the digest to:
>    <strawbale-digest-unsubscribe@crest.org>
>
> Please send any list administration questions to
> strawbale-owner@crest.org
>


-------------------------------------------------------------------------
To unsubscribe from the list, send a message to:
   <strawbale-unsubscribe@crest.org>

or for the digest to:
   <strawbale-digest-unsubscribe@crest.org>

Please send any list administration questions to
strawbale-owner@crest.org