SB: SB one sided plastering suggestions ??

[DMARSHALL@trentu.ca]

Hello all.
I'm building a workshop with ordinary stick walls, studs 2' on centre and 
plan to bale (on edge) around the outside. My plan is to wrap the stick 
wall structure in TyPar to let moisture out of the bales toward the inside. 
Then stack my bales around the outside of the structure up against the 
TyPar. Then plaster the outside bale surface only, after pinning wire 
fencing to the outside.

I would probably gypsum board/dry-wall the inside after (I'd prefer not to 
since it is only a shop).

Is plastering only one side going to be a bad thing? Will the wall sag on 
the outside? The wire fencing will be attached securely at the wall top to 
the stick wall double top plate.

Suggestions? Comments?

Dave.

-------------------------------------------------------------------------
To unsubscribe from the list, send a message to:
   <strawbale-unsubscribe@crest.org>

or for the digest to:
   <strawbale-digest-unsubscribe@crest.org>

Please send any list administration questions to
strawbale-owner@crest.org