Re: SB: metal roofs

["waterlady Frommer" <s_waterlady@hotmail.com>]

Rey wrote,

Then a friend recomended the metal cut
>off blades they sell in packs of 10 at your local hardware stores.
>They are more like a thin grinding wheel than a blade, but they
>work sweet. You have to slow down or you will abrade the blade
>quickly. Recomend you buy the contractor 10 pack(for about 11
>dollars). you will go thru couple of blades before getting the
>hang of it.
>

Just finished putting up some metal roof panels for a shelter of an aviary.  
Used the metal cutoff blades.  Nice clean cut but my arm gets a little tired 
holding the saw since it does, as Rey said, move slowly.  Makes me feel a 
little safer too without big saw teeth spinning around.
susan

_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com


-------------------------------------------------------------------------
To unsubscribe from the list, send a message to:
   <strawbale-unsubscribe@crest.org>

or for the digest to:
   <strawbale-digest-unsubscribe@crest.org>

Please send any list administration questions to
strawbale-owner@crest.org