SB: Re: Toe up sill plate detail

["david morrison" <davjen@paulbunyan.net>]

counter sink the bolts...  cut the bolt off at board level and counter sink
the nuts/washers half an inch down into the wood.    doesnt have to be
pretty,  we just took a large spade bit with a cordless drill and chewed
holes in the wood where the bolt holes were drilled.


d


-------------------------------------------------------------------------
To unsubscribe from the list, send a message to:
   <strawbale-unsubscribe@crest.org>

or for the digest to:
   <strawbale-digest-unsubscribe@crest.org>

Please send any list administration questions to
strawbale-owner@crest.org